Bulldog Art - HueForge

Fun print of an English Bulldog as a DJ. I printed mine at 200mm x 200mm size. Feel free to resize, but make sure not to change the Z-axis height. I will add two different profiles in case you want a quick print.

Print at 100% infill with a layer height of 0.08mm and a base layer of 0.16mm

Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyLite Steel Grey Transmission Distance: 1 PLA PolyLite Grey Transmission Distance: 1 PLA PolyLite Pro White Transmission Distance: 5

Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Steel Grey At layer #13 (1.12mm) swap to Grey At layer #17 (1.44mm) swap to White for the rest.