Raspberry Pi4 Case for Prusa MK3/S/+

Remixed from WDR's model with the following changes:

- M2.5 screws to mount the Pi in the case so as to not have to enlarge the holes in the Pi. - Removed extra space for the Pimoroni Fam Shim - Made a version with the Pi-cam breakaway already removed so I didn't have to cut it out

Put a Raspberry Pi4 on your Prusa MK3/S/+ and have it align perfectly with the frame.

- Smallest form factor possible for a Pi4. - All peripheral ports accessible (not the Pi headers). - Break away window for Pi-cam - version with breakaway removed. - Windows for status lights. - Slim attachment block to frame. - Uses styling cues from the Einsy Case with chamfered corners and textured sides - Easy to print: no supports needed.

Uses:

- 4 - M2.5x16 for the case - 2 - M3x10 for attaching to printer

Print Instructions

I printed with the following:

- .3mm layer height - 15% Infill - PETG - Support on build plate only (although supports aren't needed, but it's easier/faster to poke out the supports in the screw hole than cleaning it up) - Complete individual objects Other settings like .2mm layer height and no supports should work just fine as well.