Fully 3D Printed Spool Holder - Wider Version

Wider version of the “ Fully 3D Printed Spool Holder ” to fit wider spools.

Print instructions

PLA

The bearings have a 0.15 mm tolerance for the moving parts. Your printer should be able to handle this.

I used 0.15 mm layer hight for the bearings (FINE setting in PrusaSlicer)

The other parts can be done with deafult settings.

In addition i printed the rollers with outer and inner brim (default is just outer) for them not to get loose. The bearings might work better with randomized seam position, altough i havent tried that.