Quick To Print Large Vice

Quick To Print Large Vice

Notes:

This design is primarily a good starting point for remixes and the OBJ files have been included

print Settings:

nozzle diameter: 0.40mm && 1.0mm

layer height: 0.20mm && 0.75mm

infill: 25%

support: Yes only small amount though

walls: 4 && 2

top and bottom layers: 3 to 4

material: PLA

Parts Needed:

NONE

Special Instructions:

print both the screw and nut with 0.2mm resolution on a 0.4mm nozzle

print the nut at 102% scale

file the screw ever so slightly where the layers start and end to clean up the edges

print the vice body 0.75mm resolution on a 1.0 mm nozzle

print the vice jaw with support in the cut out for the nut

please feel free to leave comments and feedback

please checkout my other designs:

https://www.thingiverse.com/carter\_383/designs

please also consider donating a small amount to help allow me to turn this into a carer or please just leave me a comment with any advice on hoe yo improve my designs or ideas or new ones

https://paypal.me/3DCarter383?locale.x=en\_GB

Links:

printer: https://tinyurl.com/whd9ruaj

filament: https://tinyurl.com/pr7d5cs6

Print Settings

Printer Brand:

Creality

Printer: Ender 3

Rafts:

No

Supports: No

Resolution:

200

Infill: 38

Filament:

PolyMaker PETG

Category: Hobby