Stoeger XM1 Barrel Band (SMK PR900W, Diana Stormrider)

Specifically designed for the XM1 but should fit the PR900W and the Stormrider as they are essentially the same rifle.

The problem that I was having is one of a wandering zero after transporting the rifle in a soft case. You can, of course, simply move the existing barrel band forward. However, on the XM1, this resulted in some movement in the stock. Resulting in the safety interfearing with the operation of the trigger with the safety off. Spare Barrel bands are currently unavalible and so this monstrosity was born and will do the job untill I can get a proper one.

It's ugly but it works.

I printed mine in PLA with 100% infill.

You will need 4 M3 hex headed bolts with matching nuts. I used some spares from my MK3 kit cut down to the required length.

Designed to be fitted without the removal of anything other than the silencer.