Anycubic Kobra / Kobra 2 / Kobra 2 Pro - Toolbox 07

Anycubic Kobra / Kobra 2 / Kobra 2 Pro - Toolbox 07

The toolbox 07 is the smaller version of the toolbox 06.

Toolbox with two drawer and top .

The drawers has indexing in the closed and open position.

To install this toolbox on your 3D printer, it is not necessary to remove something from the printer.

Simply place on the upper channel of the printer profile, and pressed until it clicks.

Before printing this toolbox, I recommend you do a test print, regarding the offset between 2 pieces. Please analyze the dimensions between the compartment where the drawer fits and the drawer (see picture)

Printing parameters for both :

Layer height : 0.2

Perimeters : 3

Solid layers : 4

Infill : 15%

Support : YES - only for main body

Brim : Outer brim only 10 mm

Material : PLA

Printer : Anycubic Kobra 2 Pro

You can check my other toolboxes :

https://www.printables.com/model/707806-anycubic-kobra-kobra-2-kobra-2-pro-toolbox

https://www.printables.com/model/729540-anycubic-kobra-kobra-2-kobra-2-pro-toolbox-02

https://www.printables.com/model/733765-anycubic-kobra-kobra-2-kobra-2-pro-toolbox-03

https://www.printables.com/model/736226-anycubic-kobra-kobra-2-kobra-2-pro-toolbox-04

https://www.printables.com/model/736606-anycubic-kobra-kobra-2-kobra-2-pro-toolbox-05

https://www.printables.com/model/737756-anycubic-kobra-kobra-2-kobra-2-pro-toolbox-06

If you print this accesories please share your make, leave a review, and drop a like.