Foldable Wall Hook - Extended Slot Mod | Print in Place

Redesigned the slot little bigger to fit more screw types.

Prints flat & side perfectly if printer is fine tuned. Otherwise side printing would work.

Offset pin/hole: 0.3mm circular

Minimum Settings Recommended: 5 Walls, 5 Top Layers, 5 Bottom Layers with 40% infill.

Printer:

Voron SwitchWire

Rafts: No | Support: No

Resolution: 0.13

Infill: 40% (Minimum)

Filament: Fibreel Filament

Nozzle: 0.4mm

Printing Time: 48 Mins (with holes)