Light Bar + Side Lights for 3DSets Model 5 Rancher (Jeep Wrangler)

DISCLAIMER: Those aren't easy parts to print and asseble, please make sure that your printer is very well calibrated and take your time to edit your slicer to make good prints!

I used Overture Black Matte PLA, and Overture Transparent PETG for glass parts.

In the pictures you can see how I wired the led strips that you can find on Aliexpress:

https://www.aliexpress.us/item/1005005920137329.html?spm=a2g0o.order_list.order_list_main.68.79391802gT7nrw&gatewayAdapt=glo2usa

The bar mount must be glued to the front glass frame with superglue, then use 4x M2x6 Screws to fix the side lights and the light bar to the mount.

IMPORTANT! Before gluing the mount to the frame, fix the side lights!