Prusa MK4 / MK3 Lengthened Spool Holder Endpart for 2kg spools

Bought the 2kg Prusament spool and didn't like the Prusa 2kg spool holder as I also want to use the filament guide and hold a 1kg spool in parallel.

So, I took BrunoLeScribe's model and lengthed it to fit the 2kg spool.

Print instructions

Printed .15 layer height; 4 parameters; 50% gyroid infill; with CF-PETG material.

Would recommend PETG or PC for good layer adhesion. Personally found PLA and ASA a little brittle / not as good in layer adhesion.

If the fit is too tight, don't force it and scale XY down a little, depending on machine tolerance.