Computer Monitor Wall Mount Accessory

I've been looking at Monitor Mounts for a while but just couldn't find one I liked at a decent cost. I printed these on The Original Prusa i3 MK3S with the MMU2. I attempted to provide my Gcode but the site does not allow for my nozzle cleaning so I will have to provide them as .txt files. You will need to change them to .gcode after downloading. Thank you commenters for your concerns while I was posting this monitor mount. I now have the pins printed long ways and the whole thing out of PETG. I have set the majority of printed parts in a way to strengthen the mount.

Mounting Hardware Required:

- 4x M4x10 Cap Screws - 4x #10x1-½ Countersunk Screw (recommend using wall anchors for drywall) Order of Operations of text files converted back into G-Code:

- Bed heats to the required temp and nozzle heats to a temp near glass transition temperature - Megalovania introduction plays to indicate bed and nozzle completing temps. A prompt appears to clean the nozzle and bed. - Press dial to continue start of print - After print completes, A mario coin sound will play confirming end of the print 2021, October 3rd: It's been 4 months since I posted the updated version of this model. The PETG one is still holding up although the monitor is heavy so it is tilted down slightly. Perhaps after all my computer issues, I will make one that has tilt adjustment. The PLA monitor mount finally snapped at the top flat plate. This may or may not have had a child responsible. I now have PETG to spare so I'm reprinting the PETG for the lighter monitor now. As of this stage, I do recommend just getting your own monitor mount but as projects go, this one is holding up nicely.

2023, November 25th: Still holding strong!

There are 2 song segments in programs. Megalovania and Mario Coin.