Bike stem Phone mount [parametric]

Since most off-the-shelf aluminum phone mounts are meant to be mounted to the handlebar, I adapted it to the stem and made the model parametric so that you can customize it to your needs.

Obviously you need a round stem in addition to 2 cable ties (max. width 4,5mm) and 2 screws M4x8-12 depending on your phone bracket)

The dimensions of the STLs: stem diameter: 32mm screw spacing: 30,5mm *I used the offset version to keep the phone as centered as possible

Print in PETG with 0.2 layers and at least 3 perimeters with 0.4 nozzle. For the best protection against twisting, I additionally used some thin double-sided tape.