Zipper Pull - Baymax

Items you need:

- 2 x “4mm x 30cm” paracord. - *4 x “3mm (diameter) x 2mm (thick)” magnets (neodymium magnets are recommended for better holding power). - Super glue (for the eyes and magnets). *If you do not have magnets, I have included a 3D printed Connector .

Suggested print settings for the Main Body :

- Layer height 0.2mm. - Infill 30%. - Position the print in a way that the joining face is facing downwards. - No supports needed.

Suggested print settings for the Eyes :

- Layer height 0.2mm. - Infill 15%. - No supports needed.

Suggested print settings for Holder-Peg :

- Layer height 0.2mm. - Infill 30%. - Perimeters: 5 (for strength).

Suggested print settings for the Holder-Body :

- Layer height 0.2mm. - Infill 15%. - No supports needed.

Assembly

Ensure the smoother side (the side on the print bed) faces outward.

For more interesting zipper pull charms, be sure to track this tag ( Zipperrific ).

We've even conjured up a little home for our zipper pulls – because they deserve a stylish rest when they're not out and about with you! And to top it off, each zipper pull features a sneaky slit perfect for showcasing photos, name cards, and more. They're not just zipper pulls; they're your new tiny, table-top pals!

NOTE Most of our designs are printed and tested on a Prusa Mini and MK4, so tolerances may vary if you are using a different brand. While we strive for a smooth experience with our designs, we appreciate your understanding if tolerance issues arise.