VESA mount spacer

This is a VESA mount spacer to make the display easy to remove from VESA arms. Some displays (my issue is with Dell monitors) have a button near the VESA mount that makes hard to dismount the monitor form the arm later on. Using these spacers you can slide the monitor away from the VESA mount easily.

For one VESA mount you will need four spacers, each one needs 11 minutes to print, or 28 minutes to print four at once.

Print settings :

layer height : 0.20 material : PLA infill : 15% Perimeters : 4

No supports

With the settings above the spacer will be almost with solid infill.