FGC-68 Uppers set

I have updated to a V2022 version this version should take out the barrel wobble.

-

print the uppers in a 100% infill!

there are 2 type of left upper sides the FGC68 and the FGC9, the 9 looking like the FGC9 upper. and the FGC68 haves no external “extractor” and is there for more smooth looking.

you can use the FGC-9 extractor cover on the FGC-9 version. the link for that can be found here. https://www.thingiverse.com/thing:4415966 but you will also need the extractor pivot to complete this. and this will be in the main FGC68 set or look at the FGC-9 package

the building instructions will be shown in the main FGC68 building set

How do I assemble the FGC-68? for parts look at the parts list PDF that can be found in the FGC-68 starter kit to actually see how to do it whats this link. https://youtu.be/M\_1AAlgVm-4

some tips disassemble the FGC68

a introduction to the FGC68

a playlist to relevant things for the FGC68. https://www.youtube.com/playlist?list=PLVTi8DENyyvxTFzWGHSCEAj-XqR4OtClv

The FGC-68 in action

Category: Sport & Outdoors