FGC9-MKIISD XM8 XL SHROUD set

this shroud is loosely based on the XM8

for this model do you need the “Hybrid upper rail”

since this is the one piece version do you need a bigger printer and keep in mind that you need longer tools to install these shrouds. and I use M3 bolts that need a hex key to install and a washer to make the surface area bigger on the part

have fun with it, and looking forward to see some of the builds in the community.

__ what does the MKIISD update mean? in this update did I reintroduce a version with a small rail on the side. those will will have the words SR at the end of there name standing for SMALL RAIL.

the main update and why these are called MKIISD are that I took some improvements from the FGC9 SD and placed in the MKII shroud models that I designed. but keep in mind the are still made to just work with the MKII this is because the rail stands higher then the SD does.

so the magnet design of the MKII have been removed. and the SD style magnet have been added. the to install it is basically the same. but you will be using a cylindrical magnet with a OD of 5mm and 10mm long in size.

and wile I’m add it did I also add the grove that prevents the barrel from rotating.