BTT ADXL345 / S2DW Bedslinger Mount

A simple, single use mount to hold a Bigtreetech ADXL345 or S2DW accelerometer for input shaper calibration of the Y-Axis on bedslinger printers. Print in the center of the bed, then attach the sensor. Print with Brim for extra bed adhesion, PETG recommended. Two M3x6 screws required.

On normal bedslinger printers (x0,y0 = bottom left corner of printbed), if the accelerometer is mounted with the USB-C port to the left (see picture) one can use axes_map: x,y,z in the sensor's section in Klipper's printer.cfg for tuning the Y-Axis.