Creality K1 / K1C Unibody Riser Hexagon Plates

Hexagon plates for K1/K1C Unibody Riser Frame .

It is a two parts print that should be gluwed together. The plate has clips so you do not need to glue it onto the Unibody Ricer frame.

Update 2024-09-28 : I made it easier for you to create your own version of these plates. If you want to add ventilation or another pattern, then you can use this template .

Update 2024-07-14: New version for 15 mm taller frame.

Update 2024-06-22: Thicker plates, better fitting.

I would recommend to print it facing the front side down. Use the paint support feature of your slicer to specify where you need support.