Gridfinity OpenSCAD hex storage

A holder for hexbit drivers for Gridfinity with OpenSCAD using the Gridfinity Rebuilt in OpenSCAD library. This model allows anyone to customize the bit size, insertion depth, tolerance, number of bins, and more.

I have uploaded an stl for a 1x1 bin with magnet holes for 4mm hexbits, at an insertion depth of 12mm. This model was tuned to give a snug fit if printed with a 0.4mm nozzle on a Bambu Labs X1C

If you want to use the .scad file to make your own changes you will need to also install the third party library from kennetek