Tora barefoot shoes

size chart:

---

Filament: Recreus 82A, 3Dfils 85A

Use TPU 95A first

---

Orca Slicer / Bambu Studio settings:

Global

- layer height: 0.2mm - line width sparse infill: 0.6mm - wall loops: 0 - top shell layers: 0 - bottom shell layers: 0 - sparse infill density: 62% - Infill pattern: Grid - Infill anchor: 1000 (unlimited) - Max infill anchor: 1000 (unlimited) - Infill direction: 45° - Detect narrow internal solid infill: no - Speed sparse infill: 18 mm/s - Enable support: no - Reduce infill retraction: no

Cube modifier (256x256x0.9mm around height 1.5mm to make a 3 layers platform):

- Infill density: 60% - Infill pattern: Rectilinear - Infill direction: 0°

Filament:

- Temperature: 215 °C (95A), 220°C (85A) - Retraction: 1.8mm - Wipe: no - Z hop: 1.2mm, Normal type - Max volumetric speed: 4.8 mm^3/s

---

Prusa Slicer settings:

- layer height: 0.2mm - perimeters: 0 - solid layers top: 0 - solid layers bottom: 0 - ensure vertical - fill density: 62% - fill pattern: grid - length of the infill anchor: 1000 (unlimited) - maximum length of the infill anchor: 1000 (unlimited) - supports: no - speed: 18mm/s - infill extrusion width: 0.6mm - fan: off

---

Cura settings:

- place the model diagonally (45°) - layer height: 0.3mm - infill line width: 0.65 (or 0.4 with 162% infill flow) - wall line count: 0 - top layers: 0 - bottom layers: 0 - initial bottom layers: 0 - infill line distance: 2mm - infill pattern: grid - connect infill lines: yes - infill line direction: [] - randomize infill start: yes - infill overlap: 0mm - infill speed: 18mm/s - combing mode: off - z hop: 1.2mm

settings modifier (300x300x1.1mm solid, placed around Z = 1.4mm, to make an internal flat top 3 layers platform to place the feet)

- infill pattern: zigzag - infill line distance: 1mm - infill line direction: [0,90]

---

Website: riverfamily.art