Alternate PSU Mount for Prusa Lack Enclosure V2

An alternate PSU mounting for the Prusa Lack Enclosure V2 under the table. This suits the black Prusa MK3S/MK4 DELTA Power supply.

Note: I haven't yet figured out how I want to neatly get the cables through the side/bottom of the enclosure… Likely some sort of cutout.

My requirements:

- Mount in orientation that dust doesn't fall in ventilation slots of PSU - Make PSU easily removable from table (not screwed directly in) - Hold PSU securely - Ideally have PSU switch accessible from outer edge of Lack table. Instructions:

- Replace the printed PSU cover with “PSU Cover.stl” which adds mounting tabs. - Install original Prusa Lack Enclosure V2 parts from “prusa_mmu_enclosure_11_black.3mf” (though I didn't use the cable tube). - Install the “PSU Mount.stl” which interfaces with the “PSU Cover.stl” mounting tabs. Screw it in with the screws in the circular cutouts when engaged with the mounting tabs, as this will allow the mount to pull back and release the PSU. - I used another spare part, but I suggest adding this latch to secure the PSU: https://www.printables.com/model/578438-simple-latch-for-psu-mounting-lack-enclosure Credits:

- Inspiration from https://www.printables.com/model/31269-improved-lack-enclosure-psu-bracket-for-horizontal - Latch from https://www.printables.com/model/578438-simple-latch-for-psu-mounting-lack-enclosure - Prusa Lack Enclosure V2 https://www.printables.com/model/3673-prusa-enclosure-v2-mmu2s - Original Pruse MK3 Enclosure https://www.printables.com/model/17-original-prusa-i3-mk3-enclosure-ikea-lack-table-pr