FLSun Q5 Extruder on side

Please, upload your printed parts here, i would like to see your prints.

FLSun Extruder on side of the printer, for less vibration and for easy filament path.

Made for Q5, for stock extruder holder for side of the printer, for shortening the ptfe tubing, for the better path of filament from spool and for lowering center of gravity. The only issue is you have to extend the original motor cable about 30cm, or change it for some longer one. And you can use the original screws for the extruder, or you can replace them, because they are really cheap. You will need 2pcs M3x6-10 or M4x6-10 screws a t-slot nuts.

Added step file.