PBR Bow Silly Shell Adapter

Video: WIP

This is an adapter for the PBR Bow that allows it to fire Silly Shells !

(Please go to the respective Printables pages to get the rest of the PBR Bow files, and the files for Silly Shells.)

Hardware needed:

- 1x -016 o-ring - 1x M3 x 20mm Socket Cap Screw - 1x Small spring (A pen spring works, but I use the small springs from the Orion Lynx . McMaster #9657K644)

Print settings:

- Print the Ejector levers at 100% infill, 8 walls. Use a brim if you have warping issues. - Print the Shell Carriage at 20% infill, 5 walls. - THE "ShellCarriage" NEEDS SUPPORTS!! Specifically around the shell rim engagement edge.

Misc.

If you print any of my designs, I'd love to see yours! Please consider leaving a Make on the Printables page, and leaving a review!

China: 你好！ 我擁有這個設計。 想生產請聯繫我. 你好！ 我拥有这个设计。 如果你想生产，请联系我.

Disclaimer: This is not a toy. This blaster is meant for hobbyists, not children. Blaster must be operated correctly to avoid injury. I am not responsible for any injuries from this blaster. Please use a bright/blaze orange muzzle and barrel cap on this blaster. Consult local laws before building this high powered blaster.

Changelog:

- 7-12-2024: Release

Donations & Merch

If you like what I do, please consider supporting me!

I don't charge for my files, so any donations or merch purchases would be greatly appreciated!

- Patreon (Monthly donations) - Buy Me A Coffee (One-time donations) - AWESOME shirts made in collab with Brandon Diaz - RedBubble My merch shop, full of fun Nerf-y stickers and shirts!