3D-модель · Printables

Meshtastic Harbor Breeze Solar Panel N-Type Antenna Mount

Сведения о модели

Площадка
Printables
Цена
Бесплатно
Лицензия
CC-BY-NC
Можно печатать и изменять для себя с указанием автора; продавать модель и отпечатки нельзя.
Форматы
STLSTEP
  • 43 Лайки
  • 122 Загрузки
  • 0 Напечатали
  • 18 Комментарии
  • 2 079 Просмотры

Автор:Unrest7322

Опубликована

Описание

(From original) Uses the 60LM Harbor Breeze solar light as a base. and passes the antenna pigtail through the existing holes in the panel case. Make sure to waterproof the cable hole after passing through the antenna wire.

Here's the guide: RAK WisBlock Harbor Breeze Solar Light Enclosure Hack | Meshtastic

And the light: Harbor Breeze 60LM Solar Flood Light 0.6-Watt Black Solar LED Flood Light in the Spot & Flood Lights department at Lowes.com

Notes:

- Improvements have been made since the guide, check my photos for tips from the discord to use the solar board LED+/- to power the node. - There's another improvement using 2x schottky diodes as a voltage drop to keep the battery from charging to 100%. This extends li-ion batteries significantly and is recommended! In series with the solar board from the battery + place 2x diodes in parallel, but inverted directions (so current can flow in both directions and you get a voltage drop across it). Sorry my instructions are poor maybe i can update this later (-: - I've updated my photos to match the improvements! Shoutout to @hyper_sphere @Dubhouze-Travis @Yukine @TheSFWAct and others for these mods!

My remix --

Теги

Ещё по теме

Похожие модели

Названия используются только для указания источника результата. Polyzon не аффилирован с перечисленными площадками.