QUICK-CLIP (GEN 3) Kevlar Line Roll Mount

Simple mount for a 100ft roll of emma kites 150lb Kevlar line, or any other similarly shaped object. Roll is retained with one of the standard locking pins. Can mount donut shaped things with a max. OD of 71.5mm, min. ID of 26mm, and max thickness of 17.5mm, although it will probably work best with an object of very similar dimensions.

Initially printed out of ASA using a 0.4mm nozzle, 0.2mm layer height, 0.4mm line width. Recommend using at least 2-3 walls, at least 3 top/bottom layers. You may have to flip the model about the top plane; the correct orientation should have no overhangs.