Sovol SV08 Top Hat right side Exhaust Filter for the Incorporated display versions

WARNING: Calibrate shrinkage before you print. These are long pieces and errors will show.

I have added the cable covers since i forgot to upload them also in this repository the file could be found in all of the other display version of the top hat

If you have the top hat that we made with the display incorporated in the top hat and you want the exhaust to be in the right side. now you can!

Print settings are the same! Recommended in ABS but PETG will do the job! (we have tested PETG-CF and no stress) 3 walls 5 top 4 bottom 0.2 layer height 10% Gyroid infill.

****NOTE If you print it in ABS With a hiSpeed 3D printer you might encounter shrinkage. so you might need to compensate for that *****

this works with

MKS 5" version of the tophat

https://www.printables.com/model/957217-sovol-sv08-mount-for-makerbase-mks-ips50-5inch

BTT 5" version of the tophat https://www.printables.com/model/945045-sovol-sv08-top-hat-with-btt-5-display

BTT 7" version of the tophat https://www.printables.com/model/940825-sovol-sv08-top-hat-with-btt-7-display

You still need to print the Exhaust Filter.

https://www.printables.com/model/865869-sovol-sv08-exhaust-filter

If you want to have the Exhaust in the left side you can print this version https://www.printables.com/model/943985-sovol-sv08-top-hat-side-exhaust

Enjoy and happy printing!