Mini Cooper Kit Card

Summary This is a model of a Austin Mini Cooper in a kit card style. Some characteristic details can be discovered. Equipped with separate exhaust and front & rear bumper :) After printing, the model can be assembled with the help of integrated connectors. The wheels can be turned, but the car will not roll.

Versions The complete set is available in a STL file for a one-color print. There is a 3MF-file with predefined colors intended for users of AMS or MMU. Otherwise, the chassis, rims (incl. exhausts) and the tires must be printed separately.

Print Print with 0.15 layer hight or lower to bring up the details. No supports are needed. Use 3 perimeters and 10% infill.

Post processing The small struts can be removed really quickly and cleanly using a side cutter.

Assembly The kit is easy to assemble. All parts fit together very well. Use some grease for the hole in the rim so that the wheel turns more easily. If a part should be loose, superglue can be used.

Dimensions The fully assembled model has the following dimensions Height: 51.5mm Depth: 129mm Width: 59mm

The complete kit card has the following dimensions when printed Height: 43.7mm Depth: 136mm Width: 98mm Scaling will work in a low range due to the tolerances.

Other models I will also try to publish other car models. Stay tuned!

I hope you had as much fun printing and assembling it as I did :-)

Due to regulations in Germany, I cannot open a Printables Club as a private person. I will therefore publish all premium models free for everyone . Do you like my work? I would be very happy if you would support my work on Ko-fi .