xLCD Covers (MK4 / MK4S)

The text heights are adjusted for printing at 0.15mm increments with a 0.2mm first layer —standard on the basic MK4 profiles. Personally, I printed my covers with a 0.25mm nozzle purely for maximum detail on the text (I’ve added photos to the prints).

- Start by printing with black filament; after the first 2mm, switch to white, and finish with orange (as shown in the image below) - Black up to a height of 2mm - White from 2.15mm to 2.45mm - Finish with Orange from a height of 2.6mm to the end