LED Light Ring for CanonSX110 IS Camera

A dual light ring for a Canon PowerShot SX110 IS. The led rings were purchased from dealextreme: <a href="http://www.dx.com/p/25513">T10 15-LED White Light Car Angel Eye (60mm Diameter)</a> & <a href="http://www.dx.com/p/26001">T10 24-LED White Light Car Angel Eye (80mm Diameter)</a>. I power them with a 3 cell LiPo battery from one of my R/C helicopters.

**DO NOT FORCE THE LIGHT RING ON THE LENS OF YOUR CAMERA**

Print the two pieces and test fit the inner ring on you camera. If necessary, modify the internal diameter of the inner ring and make sure it has a snug press fit on your camera lens without using too much force. Pushing too hard on the end of the camera lens could strip the internal gears of the camera. Next, run wires through the hole in the center printed ring before soldering to the led rings, then glue the two printed parts together. You can add a little epoxy or hot glue to secure the led rings in place.