Day Blade Holder for Grand Inquisitor Lightsaber

These are modified parts for the Grand Inquisitor lightsaber created by CaseStudyno8 (https://www.thingiverse.com/thing:1945665) to allow insertion of 1" inch saber blades (day blades). This does not allow for electronics, just an empty blade.

Print the Inner_Rotating_Chamber_Left and Inner_Rotating_Chamber_Right to replace the original versions. These parts have a slot inside to accept an 8-32 machine screw nut that can be glued in place. Then, a 1/4 inch 8-32 set screw can be used to hold the blade or bladeholder in place.

Print 2 (two) of the Emitter_Shrouds to replace the originals (the hole is enlarged to accept a 1" blade).

Print 2 (two) of the Emitter Blade plug in place of the Upper, Middle and Lower Emitters. This one piece part inserts all the way to the bottom of the opening and acts as a blade plug for when you don't have the blade inserted. The set screw keeps it in place.