OctoPi Zero 2W V-Slot Mounted Case

This is a remix of guppyk's OctoPi Zero Case to fit a Raspberry Pi Zero 2W. I liked guppyk's design and the fact that it slides into one of the v-slots on the ender frame, but the RPI Zero is just slightly different from the RPI Zero 2W since the micro usb and mini hdmi slots protrude a little past the Zero 2W board.

I ended up removing the standoff pegs that slot into the holes on the corners of the RPI to avoid any fitting errors and to avoid having my RPI from getting stuck into the case since the perimeter of the case is already a snug fit.

Use x2 M2 screws to attach the lid to the case. I got a pair of M2.5-0.45 x 8 mm from Home Depot for $0.69 and they were just a little too big, so I would suggest maybe M2 screws and not M2.5