Spray can straw holder

Update 2 May 2023: Add enlarged straw hole version (+0.2mm diameter). I have not tested printing this, will do so and update if issues are observed.

*****

I chanced upon this https://www.thingiverse.com/thing:5354341 and was impressed with the simple design. I have a few WD-40 and other spray cans with straws, tried it and it works!

I had some initial difficulty inserting the straw into the hole, it eventually went in.

And so I made some design changes to improve the straw insertion.

I had the hole for the straw elongated along a slant surface with a chamfer to guide the straw in easier.

I did it for the 360ml (65.5mm) and 250ml (52.5mm) can sizes.

It seems better to me, hope others feel the same.

*****

Clicking on my AliExpress affiliate link below will give me a small kickback if you purchase something within 3 days. (at no extra cost to you) https://s.click.aliexpress.com/e/_DDKmhAd

<a target="_blank" href="https://www.amazon.com/b?_encoding=UTF8&tag=tw054d-20&linkCode=ur2&linkId=01de83fd26cad1883e1b2325a0f152c5&camp=1789&creative=9325&node=2407755011">Amazon Affiliate LInk</a>