Printable airsoft AR-15 gen4 (V4, aka EVO)

<h3><p><font color=#cb680b>Basically a done project, print an enjoy, but be sure you have at least basic understanding of how airsoft ar15s are put together before you start.</font></p></h3>

* Upd 12.06.2024 added simplified stock files, please print those as the old one was overcomplicated for no reason. You will need 2 m3 heat inserts and 2 m3x10 or m3x15 normal screws. If life is tough you can jam there an m3 nut I guess. * 26.11.2024 image with most needed screws and their placements

<h2><p><font color=#da2d07>Info for new people. This is an AEG body kit, you need to buy internals, no you better not try to print v2 gearbox and hopup</font></p></h2> Newest gen of my printable ar thing. Goal this time around is to achieve the most strength possible and to make printing outer barrel adequate. In other words to make printable airsoft ar15 looking thing that can withstand moderate amount of abuse you'd expect normal airsoft gun will (and then some). And I happily conclude that that goal is indeed reached. The only weak part this project has is an adjustable stock locking pin, which system I might revise at some point (normal buffer tubes are compatible)

This is a set of files to get a body of an M4 looking thing designed to be printed in it's entirety. All elements except screws, nuts and springs, and 12mm tube in case you want it m16 length wise. This means you buy internals. For this you need normal rear wired V2 gearbox (just buy cyma unless you have a better idea, will come with motor as well) ROTARY m4 hopup, old marui style with gears for one is bad and it will not fit. Cheapo plastic ones will do you solid, no real reason to pay for maxx here. Then you need an inner barrel and a bucking AEG ones specifically. Kit starts at 300mm inner barrel, but has shorter and longer barrel files. If unsure set on default length and muzzlebrake will account for odd lengths like 309mm and a bit further. Maximum viable length is capped at 520mm. <h3><p><font color=#1b6c4f>Note that design might still change, and for most recent version you'll have to visit my discord, link is here ↓</font></p></h3> https://discord.gg/wnRdEmx

DO NOT BE A HIGH INFIL IDIOT. This needs thicc walls, not infil. Go with at least 4 walls/perimeters. This way you actually achieve structural strength.

To assemble this in it's current form, you'll need: m6 threaded rod (half a meter will work fine), m6 nuts, flat head m5x14 screws and square m5 nuts.

For pistol grip you'll need 1 flat head M3x10 (you can go smaller) and a brass m3 heat insert, because I think tap screw m4 pistol grips suck and you should have heat inserts on hand anyway if you print stuff.

2 alternative versions are available on boosty, contains alternatively styled body with dust cover and arp9 magazine compatible lower, get it here -> https://boosty.to/mosesind/posts/6a44d51c-6be6-4817-bc7b-7d85eccdfcb0?share=post_link

This is the way to support me with updating and enhancing this version. I am very much content with how this one turned out. I do not plan for V5, however I want to include things like underbarrel grenade launcher, a DMR stock and such, interest to boosty files will propel me towards doing these faster.