Stackable Miniature Box with Lid - Space/Material Optimized

A variation of 'DnD Stackable miniature box with lid' by LundTang.

This rework flattens the inside box floor and lowers it granting a few millimeters of bonus space, as well as increases the height of the box by another 12mm to allow for slightly taller miniatures. This also makes enough room to allow 2 of my reworked inserts to be stacked.

The inserts have a thinner base and walls to allow for more miniature room. This also reduces overall print time and material required by a sizeable amount.

The lid was also trimmed slightly to reduce build time and print material.

I've included a taller variation on the box(24mm taller with a scaled emblem) as well as a few variations for the inserts. Each leaves a smidgen of space at the top for overflow. The Tall Inserts are for the Tall Box, but you can mix and max however you feel.

I will try to get more pictures up as I print.

The original box- 1x Original Box + 1x Original Lid + 1x Original Insert = 359g material

The new boxes 12mm and 32mm taller- 1x Box + 1 Lid = 221g material 1x Box +1 Lid + 1x Full Insert = 353g material 1x Tall box + 1x Lid +1x TallFull Insert = 452g material

NEW: V5 (Recommended with at least 3-4 bottom layers) 1x V5 Box + 1x V5 Lid = 194g material 1x V5 TallBox +1x V5 Lid = 230g material 1x V5 TallBox +1x V5 Lid + 1x V5 InsertE = 298g material 4x V5 TallBox +1x V5 Lid + 4x V5 InsertE - 1012g Material (1k roll) The version 5 is new but I've printed it and it works. There is even more space made within this model for less material but it remains(in my opinion) aesthetically beautiful. Make sure to use all V5 pieces together, and feel free to comment with your thoughts.

Important: If you have noticeable ringing issues I would scale the Inserts down 0.5-1% so that they will still fit.