ADXL345 X-Axis Mount for Anycubic i3 Mega X-Carriage [MK4] BL-Touch Variant

A basic X-Axis ADXL345 mount for the [Anycubic i3 Mega X-Carriage MK4](https://www.thingiverse.com/thing:3537449) (BL-Touch variant), used for resonance tuning for input shaping. See the Klipper docs [here](https://www.klipper3d.org/Resonance_Compensation.html) for more info on input shaping and how to use an ADXL345. Remove the hotend fan and attach the mount using two M3 screws to the hotend fan mounting holes (I used 12mm screws but 10-20mm should work). Then use two 6mm M3 screws to mount the ADXL345 to the mount. Make sure the pins on the ADXL345 are oriented towards the front of the printer (see image) or the cable will clash with the hotend.

3mf file is included in case your printer has different tolerances (i.e screw holes are too tight/loose).