Seeed XIAO nRF52840 & Wio-SX1262 Meshtastic & LoRa Kit + 3000 mha Battery case enclosure

This is a case enclosure for Seeed XIAO nRF52840 & Wio-SX1262 Meshtastic & LoRa Kit + 3000 mha Battery

This is a remix of the original Seeed ESP32S case. It has been modified to better fit the XIAO nRF52840 & Wio-SX1262 + a flat pack battery. (https://www.seeedstudio.com/XIAO-nRF52840-Wio-SX1262-Kit-for-Meshtastic-p-6400.html)

Use a slightly longer screw. Fill the holes with hot glue gun glue, then screw in some screws. Or just use a strip of velcro to hold the lid to the case.

*notes: -You may need to shave in cad the 'nut stop' area near the antenna hole depending on your SMA adapter. Alternatively, grind down your SMA hex nut to fit. -You may need to shave down your Cap_Part.stl (aka the lid or cover) where it meets the USBc port to fit. -Use a small file on the inside of the case top to sand down the round areas for the screw holes. See picture for file location. -Cap_Part_for_NRFv5.stl has a slightly stronger lid at the slope joint. -Print Cap upside down with supports. I recommend 100% infill