PTFE Tube and Polar Cooler Tube Clip for Qidi Q2 (and Similar Printers)

This is an exact replica of the original cable guide clip used on the Qidi Q2, that I modeled from scratch.

In case you ever need additional ones for any reason.

The model is a precise copy of the original clip, including the holes for both the PTFE tube and the Polar Cooler tube.

**Print Recommendations**:

For the best dimensional accuracy, print with the wall order set to Outer/Inner (outside-to-inside).

>Recommended material: PETG.

>Use 3–4 perimeters/walls.

>A 0.1 mm layer height (or less) is recommended for the best results.

enjoy)