Stained Glass Touch Night Lamp – Flickering Flame LED

This is a 3D printed decorative night lamp inspired by stained glass art, combined with colorful resin panels and a realistic flickering flame LED. The lamp produces a soft, warm ambient light with a natural flame effect, making it perfect as a night lamp or a unique decorative piece.

The design is fully modular and easy to assemble, allowing customization of colors and patterns.

✨ Features: Touch sensor ON/OFF (TTP223 module) Realistic flickering flame LED effect 🔥 Soft warm ambient light (perfect for night use) Stained glass style resin panels Modular and easy-to-assemble design Customizable colors and panel patterns 🧩 Components: TTP223 Touch Sensor

https://s.click.aliexpress.com/e/_c4erDduJ

https://s.click.aliexpress.com/e/_c4N58APv

2N2222 Transistor

https://s.click.aliexpress.com/e/_c32PaP8R

https://s.click.aliexpress.com/e/_c3c5xZ6x

Resistors (1kΩ )

https://s.click.aliexpress.com/e/_c3dwEr6x

https://s.click.aliexpress.com/e/_c3qxyUNl

Flame LED (3V–5V flickering type)

https://s.click.aliexpress.com/e/_c3OXhwAR

Battery holder (3× AA)

https://s.click.aliexpress.com/e/_c30Dkph1

https://s.click.aliexpress.com/e/_c3T0zTt1

Wires AWG 24

https://s.click.aliexpress.com/e/_c2yCSOYL

https://s.click.aliexpress.com/e/_c4TJLWOP

🖨️ 3D Printing Settings: Material: PLA Layer height: 0.2 mm (0.12 mm for higher quality) Nozzle: 0.4 mm Supports: only for the roof part Infill: 10–15% 🎨 Resin Panels: The panels are made using UV resin and transparent pigments to create a stained glass effect.

For best results:

Use low-viscosity resin Remove air bubbles before curing Cure evenly under UV light 🔧 Assembly: The lamp is designed for simple modular assembly.

👉 Full assembly tutorial is available here: https://www.youtube.com/watch?v=NpxP7FRJ54s 💡 Notes: Use a resistor in series with the LED if needed You can add a diffuser for softer light The design allows future upgrades (dimmer, RGB, etc.)