Eletrônica

4.2-inch RLCD Enclosure STL Models for 3D Printing

This collection gathers STL models for 4.2-inch RLCD display projects: enclosures, desk stands, wall mounts and ESP32 control-panel cases. It helps you find a housing that matches a specific display module and the way you plan to use it. Check dimensions and port cutouts before printing. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 42 modelos de 3 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 14/10/2026

Ver a coleção Mostrar todos: 999 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 999 modelos
Sobre a categoria

«4.2-inch RLCD Enclosure STL Models for 3D Printing»

The models range from closed shells that hide the controller board to open frames that leave ports and wiring accessible. Some are shaped around a specific 4.2-inch reflective LCD module, while others use a generic cutout for HMI or TFT panels. Portable audio and radio projects appear when the display is part of a larger front panel.

When choosing a model, compare the listed display outline, mounting-hole spacing and thickness with your own module. Look at whether the author expects supports, how many parts need assembly, and which material and layer settings are shown. Photos of real prints help you judge clearances around the screen, ports and buttons.

To refine the search, try related terms such as reflective LCD case, 4.2 inch display enclosure, HMI panel frame, ESP32 display housing or desk stand. Adding the controller board family, the number of buttons, or the intended use can narrow results. If a model is close but not exact, check the author's page for variants or remixes before starting a print.

FAQ

Perguntas frequentes

What is an RLCD display?
An RLCD is a reflective liquid-crystal display that uses ambient light rather than a backlight. It is often used in low-power devices where readability in bright conditions matters.
What should I measure before printing a 4.2-inch RLCD enclosure?
Measure the display's outer dimensions, active area, mounting holes, ribbon-cable exit and the board behind it. Compare those figures with the dimensions listed on the model page.
Do these models include a stand or wall mount?
Some files are only the enclosure, while others add a desk stand, wall frame or similar mount. Check the part list and photos on the author's page.
Can I adapt a case for a different board?
A case designed for one board may need edits for another board's ports and mounting holes. Look for a parametric or modular design, or be prepared to modify the mesh.
Relacionados
Eletrônica

VTX Mounts and Holders for FPV Drone 3D Printing

12134 modelos
Eletrônica

Single Cell Battery 3D Models and STL Files

3483 modelos
Eletrônica

Arduino 3D Models: Cases, Robot Arms and STL Parts

20526 modelos
Eletrônica

3D Models for Raspberry Pi 3 Cases and Enclosures

927387 modelos
Eletrônica

Dell 3D Models: Stands, Mounts and Accessories

34908 modelos
Eletrônica

PCB Case 42x42: 3D Models for Board Enclosures

7983 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias