Ferramentas e equipamentos

Anchor Clamp STL Models for Tarp, Wall and Boat Use

This collection gathers STL files for anchor clamps and related holders. It covers tarp clips, drywall anchors, tie-down points, hose grips and workshop clamp brackets. Use it to compare how different designs attach, tension and release. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 48 modelos de 4 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 13/10/2026

Ver a coleção Mostrar todos: 2924 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 2924 modelos
Sobre a categoria

«Anchor Clamp STL Models for Tarp, Wall and Boat Use»

The models fall into a few practical groups. Tarp and ground anchors usually have a wide base or spike-like form, while wall anchors rely on expanding wings or threaded bodies. Marine and tie-down clamps often use cams, wedges or saddles to grip rails and lines. Workshop brackets and belt or hose anchors tend to be smaller, with holes for screws, zip ties or straps.

When choosing a model, open the author's page and check the listed dimensions, scale and number of parts. Look at whether the design needs supports, what material and settings the author lists, and whether photos of real prints are shown. For parts that will face pulling or outdoor conditions, consider wall thickness, layer orientation and how the clamp will be fastened.

To refine a search, try synonyms such as clip, bracket, holder, mount, tie-down point or fixing. Related terms like tarp, drywall, boat, hose, belt, antenna or workshop clamp can narrow results. You can also search by the connection type, for example screw clamp, wedge, cam or expanding anchor.

FAQ

Perguntas frequentes

What is an anchor clamp used for in 3D printing?
It is a printed part that holds a tarp, rail, hose, strap or panel in place, often by clamping or expanding. Designs vary from simple clips to multi-part brackets.
What should I check before printing an anchor clamp?
Check the model page for dimensions, part count, assembly and whether supports are needed. Also review the author's material and settings notes and any photos of printed versions.
Can anchor clamps be printed in different materials?
Many designs can be printed in common filaments, but the choice depends on where the part will be used. Rigid parts may suit indoor fixtures, while flexible materials are often chosen for grips and clips.
How do I find related models?
Search for clip, bracket, mount, tie-down, tarp, drywall, boat or hose anchor. Combining a use case with a connection type usually narrows the list.
Relacionados
Ferramentas e equipamentos

3D Models of Clamps and Clips for Printing

263483 modelos
Ferramentas e equipamentos

3D Models of Clamps and Tool Holders to Print

266735 modelos
Ferramentas e equipamentos

Rod Clamp STL Models for 3D Printing

5037 modelos
Ferramentas e equipamentos

Spring Clamp 3D Models: STL Files for Printing

4427 modelos
Casa e utilidades

3D Models for Anchor Bolt Plugs and Wall Anchors

6338 modelos
Ferramentas e equipamentos

Lever Clamp 3D Models: STL Files for Bikes and Workshops

3785 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias