Eletrônica

Dipole Antenna STL Parts and Mounts

This collection gathers STL files for dipole antennas and their hardware: center insulators, balun enclosures, brackets and mast mounts. It helps when a ready-made part does not match your wire length, band or mounting point and you would rather print one. Most of these items are small, so they print quickly on a desktop 3D printer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 45 modelos de 4 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 13/10/2026

Ver a coleção Mostrar todos: 3057 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 3057 modelos
Sobre a categoria

«Dipole Antenna STL Parts and Mounts»

Dipole hardware falls into a few groups. Center pieces hold the two wire legs and the feed line, and some leave room for a balun or choke in the same body. Brackets and mounts fix the antenna to a mast, a wall or a window frame, while housings cover a feed point or an SDR element. Designs also differ by band: shortwave and HF parts tend to be larger and simpler, while VHF, UHF and 868 MHz parts are compact and dimensioned more tightly.

On the author's page, check the dimensions and the band the part is drawn for, because a few millimetres shift the tuning. Look at how many parts there are and how they join — screws, glue, a press fit or a threaded insert — and whether the model needs supports. Read the material and settings the author lists, and note the wall count where a clamp takes load. Photos of real prints show more than a render does.

If the results are too broad, add the band or frequency you work on, such as 868 MHz, 70 cm or shortwave, plus the mounting point: mast, wall, window or desk. Related terms narrow it further — balun, choke, insulator, center piece, boom, ground plane. A connector type or a mast diameter in the query also helps.

FAQ

Perguntas frequentes

What does a dipole center insulator do?
It joins the two wire legs and gives the feed line a fixed attachment point. Some designs also hold a balun or choke in the same body.
Do these parts need supports when printed?
It depends on the shape. Flat brackets and simple insulators often print without them, while housings with overhangs may need them; the author's page usually states this.
Can a printed antenna part be used outdoors?
Many can, if the filament and wall settings match the exposure. Check the material the author lists and how the part is fastened to the mast.
Which frequency should I search for?
Add the band you use, for example 868 MHz, 2 m, 70 cm or shortwave, since dimensions differ between bands.
Relacionados
Eletrônica

3D Printed Antennas: Yagi, Helix and Mount STL Files

26986 modelos
Eletrônica

3D Models for Antenna Stations and Ground Gear

2772 modelos
Eletrônica

VHF Antenna 3D Models and STL Files for Ham Radio

8046 modelos
Eletrônica

2m Antenna 3D Models: Yagi, Moxon and Ground Plane STL

1520 modelos
Eletrônica

Pan and Antenna Systems: 3D Models and STL Files

3852 modelos
Eletrônica

FPV Antenna Tracker 3D Models and STL Files

6584 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias