Hobby e makers

AR Wing Pro 3D Models: Mounts, Noses and STL Parts

This collection gathers 3D-printable parts built around the AR Wing Pro airframe, from camera and video transmitter mounts to nose cones, motor mounts and wall holders. It is useful when you already fly the wing and want to change the payload, tidy the electronics bay or store the model between sessions. Each listing comes from a different author, so the files vary in scale and in how much of the airframe they replace. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 47 modelos de 2 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 12/10/2026

Ver a coleção Mostrar todos: 57648 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 57648 modelos
Sobre a categoria

«AR Wing Pro 3D Models: Mounts, Noses and STL Parts»

The parts fall into a few groups. Camera and video transmitter mounts range from small plates that hold a compact camera or VTX to full replacement noses that enclose an air unit. Nose cones and fairings differ mainly in which camera they are shaped around and whether they keep the original hatch. Motor mounts appear both as single brackets and as complete rear assemblies, and there are trays for flight controllers and VTOL conversions that rearrange the internals. Wall mounts are simpler: they hold the finished wing on a vertical surface.

Before printing, read the author's page rather than judging from the preview image. Check the stated dimensions and scale against your own airframe version, the number of separate parts and how they join, whether supports are needed, and the material and slicer settings the author lists. Photos of real prints show how the part sits on the wing and how much clearance it leaves around the propeller, the hatch and the servo linkages.

If the first search gives few results, try related wording: the airframe is also written as a single word, and the smaller variant appears under its own name. Useful follow-up terms include winglets, nose cone, canopy, flight controller tray, motor mount, VTOL conversion and FPV wing. Searching by the camera or video transmitter you plan to carry often turns up mounts that the airframe name alone misses.

FAQ

Perguntas frequentes

What parts of the AR Wing Pro are usually 3D printed?
Most files are mounts and brackets: camera and video transmitter plates, nose cones, motor mounts, flight controller trays and wall holders. Some authors also publish winglets and small reinforcement parts.
How do I pick a camera mount for this wing?
Match the mount to the camera or air unit you intend to carry and to the nose version you have. The author's page usually lists the dimensions and the parts needed, so compare those with your own hardware before printing.
Do these parts need supports?
It depends on the file. Nose cones and angled brackets often need them, while flat plates usually do not. The author's notes or the model orientation in the slicer will tell you what the shape requires.
Can a mount be adapted to a different camera?
Sometimes, if the mounting holes and the space around the lens allow it. Check the hole spacing and the depth given on the model page, and be ready to adjust the file in a CAD tool.
Relacionados
Hobby e makers

AR Wing 3D Models and STL Parts for FPV

2949 modelos
Personagens

Wings STL Files for Cosplay, Figures and Flexi Models

18695 modelos
Militar

AR-15 3D Models: Grips, Magwells and STL Parts

25010 modelos
Personagens

Dummy 13 Wings: 3D Models and STL Options

1926 modelos
Esportes e fitness

Bicycle Wing 3D Models and STL Files

46464 modelos
Cosplay e adereços

3D Models for Cosplay Wings: STL Files to Explore

61671 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias