Eletrônica

3D Models for Bottom Housings and Enclosures

The collection gathers STL files for bottom housings: replacement shells, base covers and mounting plates for boards and devices. It helps when an original part is missing or when you need a base for your own hardware. The designs are simple printed parts, but their geometry differs a lot from one entry to the next. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 47 modelos de 4 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 15/10/2026

Ver a coleção Mostrar todos: 7172 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 7172 modelos
Sobre a categoria

«3D Models for Bottom Housings and Enclosures»

Bottom housings range from full replacement shells for handheld consoles to flat base plates for battery cells and transceivers. Some are one-piece covers that only close an opening, while others carry cutouts for ports, fans or connectors. Electronic enclosures usually come with a matching top or lid, so the bottom part is only half of the assembly.

Before printing, look at wall thickness, screw bosses and the clearance around ports, since these decide whether the dimensions match your device. Check the stated size and scale, the number of separate pieces, and whether the author lists supports, material or particular settings. Photos of finished prints on the model page show how corners and thin sections come out.

You can narrow a search with words such as shell, base, cover, plate or bracket, combined with the device or board name. Related topics include top housings, lids, bezels and mounting plates, which often appear in the same family of designs. If a result is close but not exact, look through the author's other models before starting a new search.

FAQ

Perguntas frequentes

What counts as a bottom housing in 3D printing?
It is the lower part of an enclosure or shell: the base that holds electronics, a battery or a mechanism while a top or lid closes it. Some designs are standalone base plates with no matching top.
How do I judge whether a bottom housing matches my device?
Compare the listed outer dimensions and screw hole spacing with your part, and check the cutouts for ports and connectors. The author's photos and notes usually show which device or board the housing was drawn around.
Do these parts need supports?
It depends on the design. Flat base plates usually print without them, while shells with overhangs or recessed pockets may need them. The model page often states the orientation and support requirements the author used.
Can I change the size or add holes?
Many housings are published as editable files, so you can scale them or add cutouts in a CAD program. Scaling changes wall thickness and screw fits, so modifying openings is usually safer than resizing the whole part.
Relacionados
Eletrônica

Asus Prime X370-A: 3D Models and STL Parts

1806 modelos
Eletrônica

Amplifier Case 3D Models and STL Files

119079 modelos
Eletrônica

FPV Drone Frame and Mount STL Models for 3D Printing

2391 modelos
Eletrônica

Speaker Protective Grilles: 3D Models and STL Files

1314 modelos
Eletrônica

3D Models of Computers and PC Accessories

57949 modelos
Eletrônica

18650 Battery Case STL Models for 3D Printing

139062 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias