Ferramentas e equipamentos

DeWalt Bit Holder 3D Models and STL Files

This collection gathers 3D models for holding DeWalt bits, from magnetic inserts to belt-clip mounts and case organizers. It is useful when you want a bit holder shaped around your own drill, driver or storage setup. Each listing comes from a different source, so the files and instructions vary from one page to the next. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 48 modelos de 4 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 13/10/2026

Ver a coleção Mostrar todos: 484311 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 484311 modelos
Sobre a categoria

«DeWalt Bit Holder 3D Models and STL Files»

The models fall into a few groups. Magnetic holders use small disc magnets set into pockets to keep bits in place, while belt-clip and side-mount versions attach along the body of a drill or impact driver. Case and box inserts replace or extend the storage inside a carry case, and organizer variants are sized to fit tray or rail systems. Adapters target a particular tool body or an existing holder that needs a different interface.

Before printing, read what the author lists on the model page: overall dimensions, magnet size and count, wall thickness, and the material and settings used for the shown print. Check how the bits are retained, whether the part is a press fit or needs fasteners, and whether supports are required for overhangs. Photos of real prints are the most useful guide to how the holder sits on a tool or in a case.

If the results are thin, try related wording. Searches for bit storage, drill bit organizer, hex bit tray or impact driver accessory often surface models that use different naming. Adding a tool family, a magnet size or a storage system to the query narrows the list further, and browsing the categories of a model page can lead to matching parts.

FAQ

Perguntas frequentes

What magnet size do these bit holders use?
It varies by model. Many designs specify a disc magnet diameter and thickness in the title or description, so match those numbers to the magnets you already have or can source.
Will a printed holder fit my specific DeWalt drill or driver?
Fit depends on the model. Compare the dimensions and mounting method listed by the author with your tool, and look at photos of finished prints before starting.
Which filament works for a bit holder?
The author usually names the material and settings used for the shown print. Rigid filaments are common for holders that clip onto a tool, while softer ones are used where a part needs to flex.
Do these models need supports?
Some do, especially where there are overhangs around magnet pockets or clip arms. The model page or the sliced preview indicates whether supports are needed and where.
Relacionados
Ferramentas e equipamentos

Bit Holder 3D Models for Screwdrivers and Drills

532509 modelos
Ferramentas e equipamentos

Bosch Bit Holder 3D Models and STL Files

12580 modelos
Ferramentas e equipamentos

Metabo Bit Holder 3D Models and STL Files

440903 modelos
Ferramentas e equipamentos

DeWalt 3D Models: Battery and Tool Mounts as STL

19031 modelos
Ferramentas e equipamentos

Metabo Bit Holders and Storage: 3D Models

18478 modelos
Ferramentas e equipamentos

3D Models for DeWalt Vacuum Adapters and Nozzles

2777 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias