Eletrônica

3D Models for DJI Air Unit 03 Mounts and Caps

This collection gathers STL files built around DJI air units: camera mounts, antenna brackets, lens caps and TPU packs for FPV frames. Most parts are small and quick to print, so the main work is matching them to your frame and camera module. It helps when you are repairing a build or rearranging the layout of a drone. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 46 modelos de 4 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 12/10/2026

Ver a coleção Mostrar todos: 4392 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 4392 modelos
Sobre a categoria

«3D Models for DJI Air Unit 03 Mounts and Caps»

The models fall into a few groups. Mounts hold the air unit and camera inside a frame and often combine an antenna holder or a power connector in one piece. Protectors and caps cover the lens or the antenna connectors, and cases enclose the module itself. Some files are frame-specific, while others use a common mounting pattern.

When choosing, check the mounting hole spacing and the height of the part against your frame, since a few millimetres decide whether the camera sits at the right angle. Look at the number of parts, the screws the author lists and whether supports are needed. The material matters too: flexible filament is common for parts that clamp or absorb vibration, rigid filament for brackets that carry load. Photos of real prints on the model page show how the part sits once installed.

To widen or narrow the search, try terms such as air unit mount, camera bracket, antenna mount, lens cap or TPU pack, and add the mounting pattern or frame size you use. Related searches include FPV camera protection, antenna holder, module case and power connector mount. If a result is close but not exact, look at the author's other models, since mounts are often published as a set.

FAQ

Perguntas frequentes

What is the difference between a camera mount and a full air unit mount?
A camera mount holds only the camera module and sets its angle, while a full mount carries the air unit and often the antennas or power connector as well. Full mounts tend to be frame-specific, camera mounts more often use a standard hole pattern.
Which filament is used for these parts?
Authors usually name the material on the model page. Flexible filament is common for mounts that clamp or damp vibration, rigid filament for thin brackets and caps.
How do I check that a mount fits my frame?
Compare the mounting hole spacing, the overall height and the position of the camera in the author's photos with your frame. If the numbers are not listed, ask in the comments on the model page.
Do these parts need supports?
It depends on the shape: flat mounts often print without them, while parts with overhangs or deep pockets may need them. The author's print settings and photos give the clearest answer.
Relacionados
Eletrônica

Head Unit 3D Models: Mounts, Brackets, Busts

5240 modelos
Gadgets

DJI Drone 3D Models and STL Parts to Print

24585 modelos
Eletrônica

DJI Matrice 4 3D Models and STL Accessories

127127 modelos
Gadgets

BetaFPV VR03 Goggles: 3D Models and STL Files

2704 modelos
Eletrônica

DJI Matrice 30 STL Models: Parts and Accessories

30774 modelos
Gadgets

DJI Mini 3 Accessories: 3D Models and STL Files

1260928 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias