Ferramentas e equipamentos

16mm Drill Guide STL Models for 3D Printing

This collection gathers STL files for 16 mm drill guides, from depth stops and straight jigs to dowel markers and dust collectors. You can compare how each design holds a bit, mounts on a panel or connects to a vacuum. It is a starting point for 3D printing parts used in drilling setups. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 48 modelos de 5 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 15/10/2026

Ver a coleção Mostrar todos: 5910 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 5910 modelos
Sobre a categoria

«16mm Drill Guide STL Models for 3D Printing»

Depth gauges sit on the bit and set how far it enters the material, while straight and multi-angle jigs hold the drill body or bit at a chosen angle. Panel and dowel guides focus on edge work and joint alignment, often with bushings for common bit sizes. Dust-collector versions add a port or chamber around the hole, and some guides are shaped for a specific bit shank or extrusion profile.

On the model page, check the stated bit size and shank diameter, the number of parts, and whether assembly uses screws, magnets or press fits. Look at the wall thickness around the bushing and the contact area against the workpiece, because these affect how the guide sits during drilling. The author's material and settings notes, plus photos of real prints, help you judge how the part behaves on your 3D printer.

If you need a different size, try search terms such as drill depth stop, drill jig, dowel drilling guide, pocket hole jig or corner clamp guide. Related topics include dust collection for drilling, Forstner bit guides, extrusion brackets and repair plates that use drilled holes. Adding the material or panel type, like plywood or MDF, can narrow results further.

FAQ

Perguntas frequentes

What does a 16 mm drill guide do?
It helps position a bit or set drilling depth for holes around that size, depending on whether it is a depth stop, a straight jig or a panel guide. The model page should state the exact bit and shank dimensions.
How do you choose between a depth gauge and a drill jig?
A depth gauge controls how deep the bit goes, while a jig controls the angle and position of the drill. Some designs combine both functions, so check the geometry and mounting method.
What should you check before printing a drill guide?
Check the bit size, shank diameter, part count and assembly method. Also review the author's material and settings notes and photos of real prints.
Can a guide be adapted for a different bit size?
Some models include separate bushings or sleeves for other sizes, and some can be scaled in the slicer. Scaling changes clearances, so verify dimensions after any adjustment.
Relacionados
Ferramentas e equipamentos

Drill Guide 3D Models and STL Jigs for 3D Printing

5504 modelos
Ferramentas e equipamentos

16mm Corner Fittings, Clamps and Jigs: 3D Models

3145 modelos
Ferramentas e equipamentos

Conductor and Connector STL Models for 3D Printing

607263 modelos
Ferramentas e equipamentos

3D Models for Ice Drills and Augers

35425 modelos
Ferramentas e equipamentos

Furniture Drilling Guides for 16 mm Board - 3D Models

222122 modelos
Ferramentas e equipamentos

3D Models for Ice Drill Mounting and STL Holders

177709 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias