Veículos

Fiat Ducato 244 Mounts: 3D Models and STL Files

This collection gathers STL files for mounts, holders and small interior parts built around the Fiat Ducato 244 cab and the vans that share its body. It covers device mounts, storage add-ons, vent covers and hardware, so you can compare several approaches to the same problem before printing. Most of these parts are small enough for a desktop 3D printer. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 48 modelos de 3 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 15/10/2026

Ver a coleção Mostrar todos: 2931 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 2931 modelos
Sobre a categoria

«Fiat Ducato 244 Mounts: 3D Models and STL Files»

The models fall into a few groups. Device mounts hold cameras, phones or navigation units on the dashboard, windscreen or mirror area. Storage items such as cupholders, hooks and bins add usable space in the cab, while vent grilles and covers deal with airflow and openings. Hardware pieces, including seat belt guides and door stops, replace or extend parts that see regular handling.

Before printing, open the author's page and read the details. Check the stated dimensions and mounting points, the number of separate parts and how they join, and whether supports are needed. Look at the material and settings the author lists, since parts that sit in a hot cab are often printed in PETG, ABS or ASA, and check photos of real prints to judge how the piece sits in the van.

If a search comes up short, widen the wording. Try holder, bracket, adapter, console or support instead of mount, and search by the device name plus the van name. Related topics are worth a look too: camper and motorhome interior fittings, dashboard accessories, ventilation parts and seat belt guides. Because several vans share this cab, results listed for the Jumper or Boxer often describe the same mounting area, so compare the photos and measurements.

FAQ

Perguntas frequentes

Which vans share parts with the Fiat Ducato 244?
Many listings name the Ducato together with the Peugeot Boxer and Citroen Jumper of the same generation, since they share the cab. Check the model page for the years and body version the author mentions before you print.
What material should I use for parts inside a vehicle cab?
Authors often list PETG or ABS and ASA because a cab gets hot in the sun. Read the material and settings on the model page and follow them rather than substituting your usual profile.
Do these parts need supports?
It depends on the geometry. The model page usually shows the orientation the author used and states whether supports are needed, so check that before slicing.
How do I find a mount for a specific device?
Search for the device name together with the van name, then try synonyms such as holder, bracket, adapter or console. Photos in the results help you see which mounting area a part uses.
Relacionados
Veículos

Fiat Ducato 244 3D models: STL parts and add-ons

4963 modelos
Veículos

Fiat Ducato Interior and Body 3D Models

4714 modelos
Veículos

Fiat 3D Models: Classic Cars, Vans and Parts

33836 modelos
Veículos

Fiat Albea 3D Models and STL Parts to Print

3760 modelos
Veículos

Fiat Punto 3D Models: STL Parts for Trim and Body

4454 modelos
Veículos

Fiat Punto Logo 3D Models and STL Files

7112 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias