Eletrônica

FPV Chimera 7 Drone Accessories for 3D Printing

This collection gathers STL files for accessories designed around the iFlight Chimera 7 series of FPV drones. You will find antenna mounts, protective bumpers, GPS holders, and landing leg extensions suited for 3D printing. It is a practical way to customize or repair your 7-inch long-range rig without fabricating parts from scratch. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 48 modelos de 4 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 09/10/2026

Ver a coleção Mostrar todos: 54547 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 54547 modelos
Sobre a categoria

«FPV Chimera 7 Drone Accessories for 3D Printing»

The results include several categories of drone accessories. Camera and antenna mounts vary in placement and angle, with some designed for recording gear and others for SMA or battery cable management. GPS and receiver holders position electronics away from frame noise, while guards and bumpers protect arms and propellers during hard landings. Landing legs and extended feet raise the frame to keep lenses and gimbals clear of rough surfaces.

Before starting a print, check the model page for exact dimensions and scale, because parts designed for one frame version may not fit another. Look at the number of parts, whether screws or heat-set inserts are required, and whether supports are needed for overhangs. Photos of real prints help judge fit and tolerances more than renders alone.

If you need a specific item, try synonyms such as bumper, guard, or protector, and combine them with terms like antenna, GPS, or camera. You can also search for related frame sizes or component standards, including 7-inch prop guards or long-range FPV accessories, to surface similar designs.

FAQ

Perguntas frequentes

What types of Chimera 7 accessories can I find here?
The collection includes camera and antenna mounts, GPS and receiver holders, protective guards and bumpers, and extended landing feet. Designs vary by placement and hardware requirements, so check the description to see if it matches your frame.
How do I know if a part will fit my drone?
Verify the dimensions, mounting pattern, and frame version listed on the designer’s page. Photos of printed parts and comments from other builders can help confirm fit before you start printing.
What should I check before printing a mount or guard?
Review the recommended material, layer height, and whether supports are needed for overhangs. Also confirm if the design requires screws, inserts, or additional hardware beyond the printed pieces.
Can I adapt these designs for other 7-inch FPV frames?
Many mounts and guards are designed around specific hole spacing and arm shapes, so you may need to scale or modify the STL for a different frame. Check the creator’s notes for any stated adaptability.
Relacionados
Peças para impressoras

Chimera 5 3D Models: Mounts and Adapters

1053 modelos
Eletrônica

FPV Mark 4 3D Models: STL Parts for Frames and Mounts

7323 modelos
Eletrônica

7-Inch FPV Drone STL Models and Printable Parts

13098 modelos
Eletrônica

FPV Spool and Reel STL Models for 3D Printing

13638 modelos
Eletrônica

FPV Battery Holders and Cases: STL Files to Print

5357 modelos
Eletrônica

FPV Seven-Inch Drone 3D Models and STL Files

84454 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias