Hobby e makers

FPV Drone Legs and Frames for Meteor 75 STL Files

This collection gathers 3D-printable parts for small FPV drones, mostly legs, feet, frames and mounts built around the Meteor 75 style of tiny whoop. It is useful when a stock part breaks, when you want a different camera or antenna position, or when you are planning a rebuild and need STL files rather than a whole kit. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 48 modelos de 3 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 15/10/2026

Ver a coleção Mostrar todos: 2502 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 2502 modelos
Sobre a categoria

«FPV Drone Legs and Frames for Meteor 75 STL Files»

The parts here fall into a few groups. Legs and feet are the simplest pieces and usually print as small flat shapes that lift the frame off the ground or protect the battery bay. Frames and conversion frames are larger jobs, often changing the motor spacing or the duct layout, and they come with several separate parts. Camera mounts, canopies and antenna supports sit in between: small brackets that hold a camera at a chosen angle or keep an antenna clear of the props.

Before printing, open the author's page and read what is listed there. Check the mounting hole spacing and screw size, the wall thickness at the points that take the impact, and whether the model is meant to be printed in one piece or assembled from several. Look at the material and settings the author names, since small parts behave differently in PLA, PETG or a tougher filament, and check photos of real prints to see how the part sits on the frame.

If the results are thin, try other words for the same idea: feet, landing legs, skids, bumpers, guards, canopy, camera bracket, antenna holder. Related searches such as tiny whoop frame, 75 mm frame, prop guards or battery holder often surface parts that the first query misses. Adding the frame size or the camera type you use narrows the list further.

FAQ

Perguntas frequentes

What do I need to measure before printing drone legs?
Check the mounting hole spacing, screw diameter and the height you want under the frame. Compare those numbers with the dimensions the author lists on the model page.
Which filament works for small FPV parts?
Small legs and brackets are often printed in PETG or a similar tough filament, while stiffer materials are used where rigidity matters. The author's page usually states a material and settings.
Can I use these parts on a frame other than the Meteor 75?
Only if the mounting points match. Compare the hole spacing and the space around the camera and battery before printing.
How do I find a camera mount for a specific camera?
Search for the camera name together with words like mount, canopy or bracket, then check the listed camera dimensions and screw positions on the model page.
Relacionados
Hobby e makers

3D Models for 5-Inch FPV Drone Legs and Frames

2967 modelos
Hobby e makers

Quadros 3D para FPV 75 mm

5687 modelos
Hobby e makers

Modelos 3D de drone FPV de 10 polegadas

82962 modelos
Hobby e makers

3-Inch FPV Drone Frames: 3D Models and STL Files

5094 modelos
Objetos

Modelos 3D de drone FPV de 3 polegadas

13693 modelos
Eletrônica

7-Inch FPV Drone STL Models and Printable Parts

13098 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias