Esportes e fitness

HJC GoPro Mounts: 3D Printed Helmet Camera STL Files

This collection gathers 3D-printable mounts that attach an action camera to a helmet, mostly chin and shell brackets for HJC lids, plus adapters and chest rigs. It is useful if you want a camera angle that off-the-shelf hardware does not offer and you are set up for 3D printing. Each listing is an STL file, so the fit depends on the helmet model and the settings you choose. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 48 modelos de 4 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 14/10/2026

Ver a coleção Mostrar todos: 2930 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 2930 modelos
Sobre a categoria

«HJC GoPro Mounts: 3D Printed Helmet Camera STL Files»

The most common type here is the chin mount, a curved bracket that follows the lower front of a full-face helmet and puts the camera close to the visor line. Shell mounts sit on top or on the side and are simpler in shape but more exposed. A third group is hardware: ball joints, locking nuts and adapter plates that convert one camera interface to another, or let a mount accept a different device. Chest and body rigs appear as well, aimed at riders who prefer the camera off the helmet.

When choosing, start with the helmet model and size the author names, since the same shell shape can differ between sizes. Look at how many parts the mount has, how they fasten together, and whether the geometry needs supports or prints in one piece. Read the material and settings the author lists: parts that flex or clip usually call for a tougher filament than a rigid bracket, and layer orientation matters where the bracket is thin. Photos of real prints show how the curve sits against a helmet better than a render does.

If the results are thin, try other wording: action camera mount, chin mount, jaw mount, helmet bracket, or the camera interface terms such as ball joint and tripod thread. Searching by helmet family rather than a single model often surfaces more options, and adapter files can bridge a mount made for one camera to another. Related topics worth checking are chest mounts, handlebar and bike mounts, and generic camera plates that can be combined with a helmet bracket.

FAQ

Perguntas frequentes

How do I know a printed mount will fit my helmet?
Compare the helmet model and size named on the model page with your own, then check the curvature and contact area in the photos. If your helmet is not listed, an adapter or a generic bracket may be a better starting point.
Which filament works for a helmet camera mount?
Authors usually list a material and settings on the model page. Stiff brackets and parts that clip or flex ask for different properties, so follow those notes and consider how much sun and vibration the part will see.
Do chin mounts need supports when printing?
Many do, because the bracket curves and overhangs. Check the orientation the author shows, and whether the file is split into parts that print flat and assemble afterwards.
Can I use these mounts with a camera other than a GoPro?
Some listings are built around a standard camera interface, and adapter plates in this collection convert between interfaces. Verify the connector type on the model page before printing.
Relacionados
Esportes e fitness

HJC C10 GoPro Mounts: 3D Models and STL Files

2408 modelos
Esportes e fitness

HJC F71 GoPro Mount 3D Models and STL

2471 modelos
Gadgets

GoPro 9 Cases and Mounts: 3D Models to Print

3810 modelos
Gadgets

GoPro 3D Models: Mounts, Cases and Adapters

22148 modelos
Esportes e fitness

HJC C10 Helmet Accessories: 3D Models and STL Files

1177 modelos
Esportes e fitness

HJC i91 3D Models: Mounts, Insect Stops and Helmet Parts

2281 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias