Objetos

3D Models of E-Scooter Fenders and Wings to Print

This collection gathers STL files for fenders, mudguards and wing mounts used on electric scooters. It covers rear and front parts, universal shapes and designs split into several pieces for 3D printing. The set is useful when an original plastic part has cracked and you want to print a replacement or a custom variant. Polyzon does not confirm whether models are free, their price, license, official status, affiliation, safety or fitness. Check the current terms at the source.

O texto desta coleção está em inglês; a busca funciona em qualquer idioma.

Uma coleção do Polyzon · 48 modelos de 8 sites

Como esta coleção é montada

O Polyzon monta esta coleção a partir dos resultados de busca dos sites conectados. Repetições e modelos sem prévia são removidos, correspondências fracas vão para o final e o restante segue a ordem da busca. Os modelos pertencem aos seus autores — confira os termos na página de cada modelo.

Regras de seleção: equipe editorial do Polyzon · Texto atualizado em 13/10/2026

Ver a coleção Mostrar todos: 32752 modelos →
Coleção

Comece por aqui

Todos os modelos desta coleção

Mostrar todos: 32752 modelos
Sobre a categoria

«3D Models of E-Scooter Fenders and Wings to Print»

Rear fenders are the largest group here, and they differ mainly in how they attach to the frame and how far they reach over the wheel. Front mudguards are usually shorter and thinner, since they only need to block spray thrown up by the front tire. Universal designs are shaped to fit several scooter bodies at once, while multi-part versions are split so that a smaller 3D printer can handle them.

Before printing, open the author's model page and check the stated wheel diameter, the mounting hole spacing and the clearance to the tire. Look at how the part is oriented on the build plate: thin fenders often need supports or a split layout, and the material and layer height the author lists will tell you how stiff the result is likely to be. Photos of real prints show whether the curve follows the wheel evenly.

If the results are too narrow, try other words for the same part: mudguard, splash guard, wing, fender bracket or fender mount. Related searches such as scooter deck parts, wheel covers or rear light holders often lead to files that share the same mounting points. Adding the scooter series or wheel size to the query usually narrows the list faster than browsing.

Many files in this topic are repair parts rather than accessories, so the geometry matters more than the look. A fender that sits too close to the tire can rub under load, and one that is too short still lets water through. Compare two or three variants of the same part before committing filament to a long print.

FAQ

Perguntas frequentes

What is the difference between a fender, a mudguard and a wing on an electric scooter?
They usually describe the same kind of part. Fender and mudguard are the common terms for the cover over the wheel, while wing is often used for the rear piece on models where it also carries a light or a plate.
What should I measure before printing a scooter fender?
Check the wheel diameter, the distance between the mounting holes and the gap between the tire and the frame. These three values decide whether the printed part will sit correctly.
Do scooter fenders need supports when printed?
It depends on the shape and orientation. Curved shells printed flat often need supports along the overhangs, while models split into two or three pieces can usually be printed with less of them.
Which material works for a scooter fender?
Authors usually list the material and settings they used on the model page. Stiff filaments hold the shape better, while more flexible ones tolerate vibration and small impacts without cracking.
Relacionados
Veículos

3D Models for Electric Scooter Fender Mounts

2747 modelos
Veículos

3D Models for Electric Scooter Rear Fenders

25563 modelos
Veículos

Front Fender 3D Models for Electric Scooters

4717 modelos
Veículos

3D Models for Electric Scooter Fender Supports

6968 modelos
Veículos

Electric Scooter Fenders: 3D models and STL Files

2754 modelos
Gadgets

3D Models for Electric Scooter Parts and Accessories

32410 modelos

Todas as categorias de modelos 3D

O catálogo completo de temas — de casa e utilidades a CNC, com busca em todos os sites conectados.

Abrir o catálogo de categorias